循环湿热环境下碳纤维复合材料的界面性能

针对CCF300/5428复合材料在循环湿热环境下的吸湿-脱湿行为和层间剪切性能进行了研究,并结合扫描电镜观察了循环湿热处理的不同阶段纤维/基体界面结合状态.研究结果表明:经过反复吸湿后,水分的初始扩散速率和饱和吸湿率增加;脱湿后水对复合材料层间剪切性能的影响大部分可以消除;复合材料吸湿后室温环境下性能下降较少,但在高温高湿环境下,复合材料的性能会显著降低.     

基于迟滞鲁棒性的自动车队队列稳定性控制

基于车辆纵向迟滞动态模型,对自动车队队列稳定性以及控制方法进行分析研究.建立考虑迟滞因素的车辆纵向迟滞动态模型,在此模型的基础上建立基于固定时间间距策略的滑模控制器和比例积分微分(PID,Proportion Integration Differentiation)控制器,然后依据队列稳定性判断准则分别对两种控制器进行队列稳定性分析并分别得到相关的队列稳定性条件.定量比较分析和仿真比较分析结果显示,PID控制器具有更强的迟滞鲁棒性.     

基于卫星监视几何精度因子的UDRE值估计方法

星基增强导航系统(SBAS,Satellite Based Augmentation System)通过向用户提供用户差分距离误差(UDRE,User Differential Range Error),来保证广播星历和星钟改正数的精度并增强用户的完好性性能.给出了一种用于主控站的UDRE计算方法,提出了卫星监视几何精度因子(SSDOP,Satellite Surveillance Dilution of Precision)的概念.基于UDRE和SS-DOP的表达式,通过数学推导发现UDRE受到SSDOP和限制因子的影响,而限制因子可以用其统计平均值0.7438来替代,建立了由SSDOP估计UDRE的表达式.仿真结果表明:利用SS-DOP估计出的UDRE值,其误差不超过0.8 m,能够反映出当前卫星UDRE的特性,可以作为用户在无法接收完好性信息时快速推算UDRE的一种可行手段.     

激光照射离体血液的衰变规律

采用FLS900型稳态荧光光谱仪对激光持续照射的离体血液进行了荧光检测,得到了血液成分变化及荧光光谱特征随时间衰变的规律。实验结果表明：随着血液离体时间的延长,当受407nm的光激励时,605nm处的荧光峰峰位保持不变仅强度缓慢减弱。但在离体后的14h出现了谱形突变,并在474nm处产生了一个强荧光峰。分析认为,激光对离体血液的衰变有明显的延缓作用,但当激光持续照射一定时间后却导致了细胞的形态改变进而加速了细胞的溶血进程,产生了大量的内源性荧光物质还原烟碱腺嘌呤二核苷酸。研究结果为研究血细胞的活性衰变及细胞功能结构异常等提供了参考。     

模型燃烧室油雾特性试验

利用粒子图像测速仪(Particle imaging velocimetry,PIV)测量斜切径向旋流器模型燃烧室内油雾特性,试验研究不同进气温度、流量和油气比对燃烧室内油珠颗粒大小及其分布的影响.试验结果表明:模型燃烧室内不同区域的油珠数密度明显不同,但油珠粒径分布基本相同;进气温度升高和油气比增大,使得燃烧室中油雾的索太尔平均直径(Sauter mean diameter,SMD)减小,燃油雾化得到改善;而进气流量的变化对燃烧室中油雾的SMD影响不大.     

气液同轴喷嘴缩进室动态特性均相流模型

采用频率法对气液同轴喷嘴缩进室内气液两相流动态特性进行了分析.采用均相流模型,在把液相介质参数看作集中参数的条件下讨论了缩进室边界压降振荡对液相质量流量振荡的动态响应.通过对模型喷嘴算例编程进行计算,结果表明:随着扰动频率的增加,缩进室两端压降振荡的振幅增大,压降振荡与液体流量振荡之间的相位差也增大.较小长径比的缩进室以及较小的液体喷嘴质量流量、大气液比和高反压可以抑制缩进室边界压降振荡.      

A New Method for Analyzing Integrated Stealth Ability of Penetration Aircraft

Taking into account the limitations of existing stealth performance analysis methods, a method termed as the integrated stealth performance analysis method is proposed for evaluating the stealth ability of the penetration aircraft. Based on various target radar cross section (RCS) scattering characters, this article integrates the relevant parameters needed for building up target circumferential RCS scattering model and proposes the RCS scattering controlling parameters to control the changing trends of the relevant model RCS scattering characters. According to the radar dynamic detecting characters during the whole penetration course, a dynamic stealth performance evaluating model is proposed accompanied by a series of stealth ability estimation rules. This new analysis method can enhance the integrality and dependability of the stealth analysis conclusions and summarize the relationship between the target RCS scattering characters and their effects on stealth performance. The rules indicated by this relationship can be used as the reference for designing new type of stealth aircraft and setting up specific penetration tactics.     

Monocular Vision-based Two-stage Iterative Algorithm for Relative Position and Attitude Estimation of Docking Spacecraft

Visual sensors are used to measure the relative state of the chaser spacecraft to the target spacecraft during close range rendezvous phases. This article proposes a two-stage iterative algorithm based on an inverse projection ray approach to address the relative position and attitude estimation by using feature points and monocular vision. It consists of two stages: absolute orientation and depth recovery. In the first stage, Umeyama's algorithm is used to fit the three-dimensional (3D) model set and estimate the 3D point set while in the second stage, the depths of the observed feature points are estimated. This procedure is repeated until the result converges. Moreover, the effectiveness and convergence of the proposed algorithm are verified through theoretical analysis and mathematical simulation.     

Erosion of a Polyimide Material Exposed to Simulated Atomic Oxygen Environment

Oxygen plasma source generated by thermal cathode filament discharge has been used to study the erosion process of polyimide (PI) materials in atomic oxygen (AO) environment, and their mass loss, surface morphology and surface chemical compositions have been examined by scanning electron microscope (SEM) and X-ray photoelectron spectroscopy (XPS) after exposure to incremental AO flux. The data indicate that the physical adsorption of AO at the samples' surface results in the increase of oxygen concentration when polyimide is exposed to AO flux. Then selective chemical reactions of groups of polyimide materials with AO yield volatile organic compounds, sample mass loss is on linear increase and carpet-like surface morphology forms. In the initial exposure to AO, the reaction occurs mainly between AO and carbon in specific location of aromatic ring, then the reaction rate of C=O groups gradually increases. After AO exposure, the oxygen concentration increases while nitrogen and carbon concentration decreases. Reaction rate of groups containing nitrogen is slower compared with carbon and oxygen.     

Multi-frequency RCS Reduction Characteristics of Shape Stealth with MLFMA with Improved MMN

Three new control factors are presented for calculating the multipole mode number (MMN) efficiently and precisely. The effects of these control factors on the number of integral samples and the precision of multilevel fast multipole algorithm (MLFMA) are investigated. A new approach based on control factors which is proven to be able to improve the computational efficiency and reduce the needed memory significantly as well as ensuring the proper precision. For three aircraft models, the improved MLFMA is employed to analyze their multi-frequency scattering characteristics. It is found that aircraft shape can influence radar cross section (RCS) in different frequency zones. Both the multi-frequency RCS reduction characteristics of shape stealth aircraft and the conventional aircraft with stealth design taken into account are investigated, and the results show that shape stealth exhibits significant RCS reduction in the resonance and high-frequency zones, and with a weaker influence in the Rayleigh zone. Compared with radar absorbing material (RAM), shape stealth yields a wider multi-frequency RCS reduction. The above-mentioned results can be applied to stealth design for multiple frequencies or even for all frequencies.